1. Open Database > Batches >DNE:Planting View for the “Number of Sites”, “ # of Actual Seeds”, “Growing Container” to determine what kind of growing medium and type and size of growing containers
  2. Retrieve the seeds based on Seed Number
  3. Pour out seeds from packet to a container and close the seed container with a clean lid to avoid contamination
  4. Print out a batch tag based on “Print Batch Tag” instructions and keep it close to seed container(s)
  5. Take out the number of appropriately sized perforated tray as indicated by “Number of Sites” (and stack into a 10×20 black perforated tray if needed for easy handling) and stack them in a white solid tray
  6. Put a sheet of cube rockwool in the perforated garden tray
  7. Take a 5 gallon bucket and put a little bit of Pure Blend Grow -Pro in
  8. Shake the nutrient dispenser prior to dispensing and tap to avoid dripping and wipe clean with paper towel
  9. Fill the rest of the bucket with fresh cold tap water (the solution should be light caramel color)
  10. Pour the solution over rockwool generously until completely saturated
  11. After the excess liquid has drained
  12. Transfer the rock wool and perforated tray onto a NEW solid white tray and bring to a work area
  13. Wet a pair of tweezers/chopsticks/tools (no hand) by dipping on the wet rockwool cube and dipping it lightly into the seeds to pick up  the number of seeds indicated in “Actual Seeds Per Site”
  14. Dip the tweezer coated with seeds into middle of rockwool cube to deposit the seeds
  15. Deposit the seeds to each of the rockwool cube
  16. Return unused seeds back into packet
  17. Spray tray generously with sprayer
  18. Spray inside of humidity dome and cover the tray
  19. Update the user and position in Batches >DNE:Planting View> Update User > Position (SS) and this auto-filter the batch out of the list
  20. Put tray onto a heating pad in dark cycle
  21. Clean work area thoroughly and update task as complete in database